How to reset hoover washing machine
Share
How to Reset Your Hoover Washing Machine
If your Hoover washing machine is displaying error codes, acting up after a power surge, or simply not working as expected, performing a reset can often resolve the issue. Here’s a comprehensive guide to help you reset your Hoover washing machine and get your laundry routine back on track.
Step 1: Try a Hard Reset (Power Cycle)
This simple method works for most models and is especially helpful if your machine is unresponsive or stuck on an error code.
- Turn off your washing machine and unplug it from the wall socket.
- Wait for at least 1 minute (waiting up to 5–10 minutes can be even more effective).
- Plug the machine back in and turn it on.
- Open and close the washing machine door 6 times (some models may require up to 12 times). This signals the machine to restart its system.
Step 2: Perform a Button Reset (For Most Digital Models)
If the hard reset doesn’t resolve the issue, you can try the following button sequence, which puts the machine into self-test mode and resets its electronics:
- Press and hold the leftmost (first) button on the control panel.
- While holding the button, turn the program selector knob from the ‘Off’ position two clicks clockwise.
- Continue holding the button for 3 seconds, then release it (but do this within 5 seconds).
- If done correctly, all the LED lights on the control panel will turn on at the same time.
- Press the Start/Pause button to initiate the self-test mode. The washing machine should now be reset and ready to use.
Quick Troubleshooting Tips
- If the reset doesn’t work, double-check your model’s user manual for specific instructions, as sequences can vary slightly.
- Always ensure the washing machine is unplugged before attempting any reset for safety.
- If problems persist after resetting, there may be a deeper mechanical or electrical issue—contact Hoover customer support or a qualified technician.
Why Reset Your Hoover Washing Machine?
Resetting can:
- Clear error codes and glitches
- Restore default settings
- Resolve performance issues
- Extend the lifespan of your appliance
Summary Table: Reset Methods
| Reset Method | Steps | When to Use |
|---|---|---|
| Hard Reset (Power) | Unplug for 1+ minute, plug in, open/close door 6–12 times | Unresponsive or error codes |
| Button Reset | Hold leftmost button, turn knob 2 clicks, release after 3 sec, press Start/Pause | Digital models, persistent errors |
By following these steps, you can quickly reset your Hoover washing machine and resolve many common issues. If you found this guide helpful, feel free to share it with others or leave a comment below!
Related Articles :