How to reset beko dishwasher
Share
How to Reset a Beko Dishwasher
If your Beko dishwasher isn’t starting, is stuck mid-cycle, or is showing error codes, a reset can often resolve the issue and restore normal operation. Here’s a simple guide to help you reset your Beko dishwasher and get back to sparkling clean dishes.
When Should You Reset Your Beko Dishwasher?
- The dishwasher is unresponsive or won’t start
- It’s stuck in a cycle or displaying error codes
- You’ve fixed a problem but the alert lights remain on
- After a power cut or electrical glitch
Step-by-Step: How to Reset Your Beko Dishwasher
1. Cancel the Current Cycle
- Find the Start/Stop button on your control panel.
- Press and hold it for about 3 seconds.
- This cancels the current cycle and drains any remaining water.
- Wait until the dishwasher enters standby mode.
2. Full Control Board Reset
- After cancelling, release the button.
- Press and hold the Start/Stop button again for 10–15 seconds.
- This resets the control board and restores default settings.
- Now you can select a new program and restart the dishwasher.
3. Hard Reset (If Needed)
- If the control panel reset doesn’t work, power off the machine.
- Unplug it from the wall or switch off the circuit breaker.
- Wait at least 1 minute before restoring power.
- Repeat the reset process after powering back on.
4. Factory Reset (For Persistent Issues)
- For some models, switch off the power at the breaker for at least 60 seconds.
- Then reconnect and repeat the reset steps above.
Extra Tips
- Always check your user manual for specific model instructions.
- If error codes persist, contact Beko support.
- Regularly clean filters and check for blockages to prevent issues.
Keep Your Dishwasher Running Smoothly
Resetting your Beko dishwasher is a fast way to clear minor glitches and restore functionality. It’s easy, safe, and can save you a service call.
Looking to upgrade or need reliable replacements?